FLC Heavy Equipment Excavator , John Deer Technology Industrial Excavators Machinery

Top Selling Features, Advantages, and Benefits

Features

Advantages

Benefits

1.

Advanced John Deere Phoenix Electronic Control System

Fewer wires, relays, and unsealed connections; most circuits controlled by the FLC

More electrical system reliability and increased uptime

2.

Isuzu engines

Proven, reliable turbocharged engines; all are Tier 2/Stage II emissions compliant

More uptime while meeting Tier 2/Stage II emissions levels

3.

Work modes

Three selectable hydraulic work modes allow the operator to match machine power to the job at hand

Optimizes machine efficiency and lowers daily operating costs

4.

Sealed Switch Module (SSM)

Incorporates many cab switches into one location; sealed to protect from dust and moisture; much longer life cycle than rocker switches; reduces wiring by controlling all functions with only four wires

Higher electrical system reliability and more uptime

5.

Monitor

Full color LCD monitor with detailed onboard diagnostics for troubleshooting; no laptop or cables required

Fast diagnostic response to maximize machine uptime

6.

Auto Idle

Automatically reduces engine speed to a low rpm when no functions are activated for five seconds

Reduces fuel consumption, lowering daily operating costs

7.

Glow plugs

Aids engine starting in cold weather conditions

Keeps customers productive, even in cold temperatures

8.

Remote mounted engine oil and fuel filters

Easy access to filters for simple routine oil and filter changes

Easy serviceability increases machine uptime and lowers daily operating costs

9.

Pressure Boost

Temporarily increases hydraulic power when commanded by the operator; also engages automatically when operating both travel functions and a dig function

Provides additional power when needed, increasing productivity

10.

Rock Guard

Additional plating on the back of the arm protects the arm structure when curling a loaded bucket

Additional structural protection increases uptime

Engines

All XCG -8B Series Excavators use Isuzu engines:

·      Turbocharged for optimum power and performance

·      Meet Tier 2 / Stage II emissions levels

·      Charge air cooled

·      Large tilt hood provides open access to engine compartment

·      Standard glow plugs for cold weather starting assistance

·      Auto idle feature automatically lowers engine speed when no functions are activated for five seconds to reduce fuel consumption and jobsite noise

·      emote mounted engine oil and fuel filters for ease of serviceability

·      Severe duty fuel filter with water separator for additional filtration and uptime

Operator Station

       The operator station was designed with visibility, comfort, and productivity in mind.  The        operator station features:

·     Large windows for excellent all around visibility including an overhead sun roof hatch for ventilation and overhead visibility

·     Front cab work lights, boom work lights, and front frame work lights

·     Front windshield wiper and washer

·     Periodic Maintenance chart located on the right side window for quick reference

·     Spacious storage area behind the seat

·     Easy to view, user friendly full color LCD monitor

·     Sealed Switch Module (SSM) combines most cab switches into one convenient location

·     Flex Load Controller (FLC) located at the rear of the cab, where it is well protected from the outside elements – Used to control electrical circuits instead of relays for higher electrical system reliability

·     Suspension seat with multiple adjustments to comfortably fit any size operator

·     Ergonomically designed and positioned controls to reduce operator fatigue

·     Climate controls and radio to keep operators comfortable and productive

MONITOR

      The operator station features a right front side console mounted LCD color monitor as           standard equipment.

·     User friendly monitor menu structure

·     Easy to read screen with on-board diagnostics, digital gauges, and vital system status lights

·     Onboard diagnostics including live sensor readings and switch checks – Requires no special tools or test equipment

              Diagnostic Trouble Codes give detailed information for troubleshooting,                          including code descriptions and occurrence information

Sealed Switch Module (SSM)

       The proven technology of the Sealed Switch Module includes many machine features:

·     Incorporates many cab switches into one central, easy to access location, just below the monitor

·     Sealed to protect from dust and moisture

·     Much longer component life than rocker switches

·     Reduces wiring by controlling all functions with only four wires

·     Auto idle feature for use during non-productive idle time – Reduces engine speed to low idle, when no functions are activated for five seconds – Saves fuel, noise, and reduces wear on the engine and hydraulic system

             Three hydraulic work modes allow the operator to optimize machine                                  efficiency for the job at hand

Hydraulics

      Powerful, responsive hydraulics system with the following features:

·     Open center hydraulic system minimizes complexity, and it is less susceptible to contamination

·     Two tandem variable displacement axial piston pumps provide hydraulic flow for operating multiple functions at the same time

·     Pump pressure sensors allow hydraulic oil pressures to be viewed in the monitor by technicians for simplified diagnostics to increase uptime

·     Standard auxiliary hydraulics valve for increased machine versatility (controls and plumbing are optional)

·     Three hydraulic work modes: H (High Power), S (Standard Power), L (Low Power) control the maximum pump displacement and engine speed, giving the operator better controllability for the job at hand

              Pressure Boost feature temporarily increases hydraulic system pressure                      for additional hydraulic power when needed – It can be engaged by the                                 operator,  and it also engages automatically when combining the operation of left and            right travel and a dig function

Serviceability

       Many maintenance friendly items can be found on XCG excavators, including:

·     Periodic Maintenance chart located on the right side window of the operator station for quick reference to service items

·     Grouped daily service points

·     Easy to view hydraulic oil sight gauge for fast fluid checks

·     Remote mounted engine oil and fuel filters for ease of serviceability

·     Easy access to cooling package

·     Screen protected hydraulic oil cooler to minimize dirt and debris build up to maximize cooling efficiency

·     Open access to engine compartment with tilt hood

·     Large onboard tool box for storage located on the right front side of the machine

              Electric fuel refill pump located in the tool box can be used to refill the                        machine from bulk fuel sources to increase productivity and uptime

Structures

      Strong structures help support machine uptime in many ways:

·     X-frame undercarriage design provides excellent load distribution to the ends of the track frame

·     Sloped frame reduces material build up on the undercarriage, reduces component wear, and decreases time spent cleaning the undercarriage

·     Standard rock guard on the back of the arm – Additional plating protects the arm when curling a loaded bucket

MODEL

XCG210LC-8B

Rated bucket capacity

0.9 m3

Operating weight

21380

Engine

Model

ISUZU BB-6BG1T

Rated output

120kW/2150 rpm

Bore × stroke

105/125 mm

Displacement

6.494 L

Max. torque

582.5 Nm

Batteries

2×12 V

Hydraulic System

Main pumps

2x Variable displacement axial piston pumps

Max. flow

2x 200 L/min

Hydraulic motors

Travel motors

2x Variable displacement axial piston motors

Swing motors

1x  Fixed displacement axial piston motor

Relief valve setting

Implement circuit

31.4 Mpa

Swing circuit

25.5 Mpa

Travel circuit

31.4 Mpa

Pilot circuit

3.9 Mpa

Max. bucket digging force

135.4 KN

Max. arm digging force

99 KN

Swing System

Swing speed

13.5 rpm

Drive

Max. drawbar pull

183 KN

Travel speed

High speed

5.3 Km/h

Low speed

3.2 Km/h

Max. grade ability

35o

Undercarriage

Carrier rollers

2x 2

Track rollers

2x 9

Track pads

2x 49

Shoe width

600 mm

Ground pressure

41.83 kPa

Capacities

Fuel tank

390L

Hydraulic tank

190 L

Hydraulic System

220 L

Cooling system

28 L

Engine oil

21.5 L

Travel reduction unit

2x 5 L

Swing reduction unit

4.4 L

Working Ranges

Max. cutting height

9587 mm

Max. dumping height

6985 mm

Max. digging depth

6470 mm

Max. vertical wall digging depth

5410 mm

Max. digging reach

9780 mm

Max. digging reach on ground

9610 mm

Min. front swing radius

3548 mm

Standard boom

5700 mm

Standard arm

2900 mm

Dimensions

Overall length

9762 mm

Overall height of boom

3015 mm

Overall Width

2980 mm

Overall height of cab

2900 mm

Counterweight clearance

1090 mm

Min. ground clearance

468 mm

Tail swing fadius

2870 mm

Track ground length

3640 mm

Track length

4440 mm

Track gauge

2380 mm

Track overall width

2980 mm

Shoe width

600 mm

Overall height of counterweight

2060 mm

Overall width of superstructure

2710 mm